All Emperor2011's Software in one thread !! (updated daily)

[Emperor2011]

time off audio dime [tt] v1.2.1 | Size: 6.24 MB
Language: English​

dime[tt] gives you the ability to process the transient and tonal components of your audio as completely independent tracks.

What's more, instead of limiting you to a set of baked-in effects for transient shaping, dime[tt] lets you use your very own VST3 and AU plugins, providing you instead with a novel way to make the most out of your existing plugin library.

Features
fast, dead simple transient-tonal splitting: dial-in the perfect transient-tonal separation via two simple knobs: sensitivity and decay. works great on single sources, as well as vocal and drum busses.
build your own effect chains: dime[tt] can host VST3 or AudioUnit plugins (regardless of whether you run it in VST3 or AudioUnit), and lets you chain up to 4 plugins in a chain to process each split signal path. it also embeds the UIs of each plugin inside its own, and passes through the sidechain signal to all the hosted plugins that support sidechain input.
hosted parameter mappings: tweak your hosted plugins without needing to open the hosted plugins UIs, by mapping any of the hosted plugins' parameters to a set of sliders in dime[tt]'s interface.
waveform visualizers: see the transient-tonal separation in action, thanks to realtime display of the split waveforms.
internal latency compensation: it goes without saying, dime[tt] handles the differences in latencies of the different plugin chains and compensates for them internally before joining the paths to provide a coherent, clean output.
solo: monitor each split signal in isolation. very useful for fine-tuning and hearing what dime[tt] and its hosted plugins are doing to your input audio.
balance and dry/wet: tweak the balance of your signal between the two split signals, and dial-in the overall effect of dime as needed through a global mix knob.

Whats New
Updates: official site does not provide any info about changes in this version

HOMEPAGE:

https://timeoff.audio/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/384158f9c4868c712cd4bc61f661cfdf/time_off_audio_dime_tt_v1.2.1.rar

https://clicknupload.click/s6wblxb840zn/time_off_audio_dime_tt_v1.2.1.rar

 

[Emperor2011]

ANSYS EMA3D Cable Charge 2025 R2 (x64) | Size: 12.29 GB
Language: English​

Ansys EMA3D is a platform solution for analyzing the electromagnetic compatibility parameters of cable lines. Using EMA3D Cable early in the design process can improve the accuracy of product performance predictions, reduce development costs and the need for physical prototyping, and use test results as the basis for final approval and certification.

EMA3D Cable allows engineers to efficiently evaluate complex cable harness designs and evaluate protection schemes for vehicles of all sizes.

Whats New
Updates: official site does not provide any info about changes in this version

HOMEPAGE:

https://www.ansys.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/7ac6119887318b8725a25754b225034b/Ansys.2025.R2.EMA3D.Win64-SSQ..part1.rar
https://rapidgator.net/file/ee3318d7a427e08831de0b5d0957d23a/Ansys.2025.R2.EMA3D.Win64-SSQ..part2.rar
https://rapidgator.net/file/b2dedf6e2e23af186eb0a4f94959b857/Ansys.2025.R2.EMA3D.Win64-SSQ..part3.rar
https://rapidgator.net/file/221ca779f7df998ffba8d7ea8528d720/Ansys.2025.R2.EMA3D.Win64-SSQ..part4.rar
https://rapidgator.net/file/b1cb871f15a576de2f99a4533e0a0584/Ansys.2025.R2.EMA3D.Win64-SSQ..part5.rar
https://rapidgator.net/file/1594306d98d9c597b6eb0972df23fb19/Ansys.2025.R2.EMA3D.Win64-SSQ..part7.rar
https://rapidgator.net/file/5e028aa7e3f7b5b264d8b3bba3346a58/Ansys.2025.R2.EMA3D.Win64-SSQ..part8.rar

https://nitroflare.com/view/82FD6B849033C43/Ansys.2025.R2.EMA3D.Win64-SSQ..part1.rar
https://nitroflare.com/view/58CD56E2C54857E/Ansys.2025.R2.EMA3D.Win64-SSQ..part2.rar
https://nitroflare.com/view/BEECC2D86E5BF06/Ansys.2025.R2.EMA3D.Win64-SSQ..part3.rar
https://nitroflare.com/view/BEC42306A88E4DD/Ansys.2025.R2.EMA3D.Win64-SSQ..part4.rar
https://nitroflare.com/view/2CBE0A6916A29F5/Ansys.2025.R2.EMA3D.Win64-SSQ..part5.rar
https://nitroflare.com/view/15BB3E0E5BC2B3F/Ansys.2025.R2.EMA3D.Win64-SSQ..part7.rar
https://nitroflare.com/view/19B8A833D779E62/Ansys.2025.R2.EMA3D.Win64-SSQ..part8.rar

 

[Emperor2011]

InventorCAM 2025 SP2 HF1 for Autodesk Inventor 2018-2025 (x64) Multilingual | Size: 6.38 GB
Language: English​

InventorCAM is a new generation CAD / CAM system developed by Israeli firm SolidCAM Ltd (Official distributor in RussiConsistent Software). This system is a complete solution for automation of metalworking production. With the use of a wide range of strategies offered by InventorCAM for turning, milling, turning-milling and electro-erosion machining, a technologist can quickly prepare the necessary set of control programs for machining a product.

InventorCAM Functionality
Support for 64bit calculations due to the availability of a special version for SW 64bit
2.5-axis milling
InventorCAM provides high efficiency and accuracy of 2.5-axis milling of parts. Different processing strategies for elements such as contour, sampling (with islands) and groove, as well as various types of hole machining are supported: drilling, reaming, threading, etc. The system has a wide range of possibilities for 2.5-coordinate processing of analytical surfaces.

3-axis milling
InventorCAM provides a wide range of tools that can be effectively used to handle products with complex geometries (stamps, molds) and prismatic parts. As a geometry for 3-axis machining a three-dimensional surface or solid model is used. The system supports various types of roughing and finishing strategies, such as raster processing with a specified or automatically determined angle of the raster, equidistant processing, projection processing, processing on waterlines, etc.
In addition to the already listed features of 2.5- and 3-axis machining, InventorCAM offers tools for identifying and modifying sites that were not processed in previous transitions. It is possible to create a database of standard technological processes. Once created, this parameterized technological process can be repeatedly used in the future, which significantly reduces the time of preparation of production, increases the reliability of the developed programs, unifies the style of technological development, guarantees the use of only optimal processing technologies and ensures the production independence from the human factor. The absence of cuttings is guaranteed by the presence of means of control and visualization of machining.

Multi-axis machining
InventorCAM offers various means of creating control programs for multi-axis machining at 4- and 5-axis machining centers. The model is installed in the user defined processing plane, after which the system automatically calculates all the necessary displacement and rotation parameters for the workpiece zero. As a result, the preparatory-final transition time is significantly reduced and the accuracy of processing is increased.

Turning and turning-milling processing
InventorCAM has a wide range of functions for automating the creation of control programs for turning and turning and milling. InventorCAM supports various types of tools, which allows you to effectively produce longitudinal turning, trimming, grooving, etc. In addition, InventorCAM allows you to automatically produce roughing and finishing of complex contours. Support for the rotating tool allows you to perform milling and drilling transitions at machining centers.

Electroerosive processing
The InventorCAM set of strategies for wire EDM allows the processing of external and internal contours with a constant and variable angle of inclination. There is a possibility of 4-axis machining. A special algorithm prevents the falling of the processed material. InventorCAM provides the user with the means to control the physical processing parameters along the entire path of the wire.

ATTENTION! Users of Delcam PowerMILL 2015-2016 under Multikey key emulator!
Version Multikey Emulator 18.1.0 64-bit in this release is NOT compatible with Delcam PowerMILL 2015-2016!
The solution for installing both SolidCAM and PowerMILL on the same computer under Multikey is in the distribution of PowerMILL 2016-but the version of the emulator laid out there assumes the mandatory loading of Windows into the test mode, which is not required with the version of the emulator from this distribution.

Whats New
Read: InventorCAM-Release_Notes-2025-SP2-HF1.pdf

HOMEPAGE:

https://www.solidcam.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/eed960bf5fc38c16e32365d456c6c05c/InventorCAM.2025.SP2.HF1.Win64-SSQ..part1.rar
https://rapidgator.net/file/a864abf51f5382924fbce579d4356e76/InventorCAM.2025.SP2.HF1.Win64-SSQ..part2.rar
https://rapidgator.net/file/3e98b28cda1dafda9d2d3e5ac6a73c64/InventorCAM.2025.SP2.HF1.Win64-SSQ..part3.rar
https://rapidgator.net/file/dbdf9f8a54c7495e0743e4e92d63ded1/InventorCAM.2025.SP2.HF1.Win64-SSQ..part4.rar
https://rapidgator.net/file/a48b6d7e5dfa0604a68a5eb6c6cb58c2/InventorCAM.2025.SP2.HF1.Win64-SSQ..part5.rar
https://rapidgator.net/file/a8f97ed987214a48510345f7f51acafc/InventorCAM.2025.SP2.HF1.Win64-SSQ..part6.rar
https://rapidgator.net/file/9daf1e226813370a405ac8f144a62834/InventorCAM.2025.SP2.HF1.Win64-SSQ..part7.rar

https://nitroflare.com/view/4082B6DE57D944A/InventorCAM.2025.SP2.HF1.Win64-SSQ..part1.rar
https://nitroflare.com/view/CC14EC03E8CFBA8/InventorCAM.2025.SP2.HF1.Win64-SSQ..part2.rar
https://nitroflare.com/view/EA6098555D39680/InventorCAM.2025.SP2.HF1.Win64-SSQ..part3.rar
https://nitroflare.com/view/D8C38B335CCAEB1/InventorCAM.2025.SP2.HF1.Win64-SSQ..part4.rar
https://nitroflare.com/view/C74475068E6967D/InventorCAM.2025.SP2.HF1.Win64-SSQ..part5.rar
https://nitroflare.com/view/C251BD47FBF9088/InventorCAM.2025.SP2.HF1.Win64-SSQ..part6.rar
https://nitroflare.com/view/3FEA3B7357BBE83/InventorCAM.2025.SP2.HF1.Win64-SSQ..part7.rar

 

[Emperor2011]

Maxon Cinema 4D 2025.3.3 (x64) Multilingual | Size: 962.29 MB
Language: English​

Continuing an ongoing effort to make simulation and particle effects fast and easy, Cinema 4D users can create advanced particles using the new Follow Spline modifier, which makes it easy to flow particles along a vector shape. Every new subscription of Cinema 4D 2025 now includes access to the full power of Redshift rendering, enabling any Cinema 4D user to fully utilize GPU or CPU, which is ideal for rendering high-end 3D animations fast.

Applying weights and forces to objects in rigid body simulations is now easy, while enhancements to Pyro also provide users more options to dial in a specific look. The new Field Driver tag will help with adding procedural animations to objects, a new Object Profiling Manager helps optimize viewport performance, and improved OCIO color management will ensure consistent color. Optimized exchange format support enables more integrated workflows, thanks to the possibility to export instances and skeletal animations to USD and work with presets stored in Substance 3D materials.

WHAT IS CINEMA 4D?
Cinema 4D is a professional 3D modeling, animation, simulation and rendering software solution. Its fast, powerful, flexible and stable toolset make 3D workflows more accessible and efficient for design, motion graphics, VFX, AR/MR/VR, game development and all types of visualization professionals. Cinema 4D produces stunning results, whether working on your own or in a team.

AWARD-WINNING MOGRAPH
MoGraph is a procedural modeling and animation toolset that gives motion designers the ability to quickly and easily create complex and abstract animations. At the heart of MoGraph is the Cloner object which allows you to duplicate objects in a variety of ways. Add MoGraph's powerful collection of Effectors to the mix and you can put everything in limitless motion using sound, fracturing, fields, and so much moroften without creating a single keyframe! MoGraph is the go-to system for professional broadcast graphics designers and was recognized by the Academy of Motion Picture Arts and Sciences with a Technical Achievement Award in 2019.

UNMATCHED SPEED AND PERFORMANCE
Thanks to its new core, Cinema 4D is numerous times faster than previous versions and offers unparalleled power for your most demanding scenes. We have optimized all areas of the software, making it even more responsive, while keeping the intuitive workflows that you have come to love over the years. You will especially notice incredible speed gains when playing back your complex motion graphics and simulation scenes in the editor.

EASY TO LEARN - EASY TO USE
Cinema 4D is widely recognized as one of the easiest and most accessible 3D packages to learn and use. To soften that learning curve Maxon offers thousands of tutorials on Cineversity and hundreds of Quick Tips. Maxon's Training team also hosts weekly and monthly live webinars to help new and existing users succeed - check out our archives and events schedule for more information.

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.maxon.net/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/f19aa13d4d8014193c9fd4a5247fb055/Maxon_Cinema_4D_2025.3.3_x64_Multilingual.rar

https://clicknupload.click/w5orge34s9a5/Maxon_Cinema_4D_2025.3.3_x64_Multilingual.rar

 

[Emperor2011]

SolidCAM 2025 SP2 HF1 for Solid Edge 2020-2025 (x64) Multilingual | Size: 6.57 GB
Language: English​

SolidCAM is a new generation CAD/CAM system developed by the Israeli company SolidCAM Ltd (Official distributor in RussiConsistent Software). This system is a comprehensive solution for the automation of metalworking production. Using a wide range of SolidCAM strategies for turning, milling, turning-milling and electrical discharge machining, a technologist can quickly prepare the necessary set of control programs for mechanical processing of a product.

SolidCAM functionality

2.5-axis milling
SolidCAM provides high efficiency and accuracy of 2.5-axis milling of parts. Various strategies for processing such elements as contour, selection (with islands) and groove are supported, as well as various types of hole processing: drilling, countersinking, thread cutting, etc. The system has a wide range of capabilities for 2.5-axis processing of analytical surfaces.

SolidCAM 3-axis milling
offers a wide range of tools that can be effectively used to process items with complex geometry (dies, press forms) and prismatic parts. A 3D surface or solid model is used as geometry for 3-axis machining. The system supports various types of roughing and finishing strategies, such as raster machining with a specified or automatically determined raster angle, equidistant machining, projection machining, waterline machining, etc.

In addition to the already listed capabilities of 2.5- and 3-coordinate machining, SolidCAM offers tools for identifying and refining areas that were not processed in previous transitions. It is possible to create a database of typical technological processes. Once created, such a parameterized technological process can be repeatedly used in the future, which significantly reduces the time of production preparation, increases the reliability of the developed programs, unifies the style of technological developments, guarantees the use of only optimal machining technologies and ensures the independence of production from the human factor. The absence of cuts is guaranteed by the presence of control and visualization tools for mechanical processing.

Multi-axis machining
SolidCAM offers various tools for creating control programs for multi-axis machining on 4- and 5-axis machining centers. The model is installed in a user-defined machining plane, after which the system automatically calculates all the necessary offset and rotation parameters for the part zero. As a result, the preparatory and final transition time is significantly reduced and the machining accuracy is increased.

Turning and turn-milling processing
SolidCAM has a wide range of functions for automating the creation of control programs for turning and turn-milling processing. SolidCAM supports various types of tools, which allows for efficient longitudinal turning, end trimming, groove processing, etc. In addition, SolidCAM allows for automatic roughing and finishing of complex contours. Support for rotating tools allows for milling and drilling transitions on machining centers.

Electrical Discharge Machining
SolidCAM's set of wire electrical discharge machining strategies enables machining of external and internal contours with constant and variable inclination angles. 4-axis machining is possible. A special algorithm prevents the material from falling. SolidCAM provides the user with the means to control the physical parameters of machining along the entire wire path.

Whats NewRead: SolidCAM-For-SolidEdge-Release_Notes-2025-SP2-HF1.pdf

HOMEPAGE:

https://www.solidcam.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/997621280eb16705a72529d4b53dcc4f/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part1.rar
https://rapidgator.net/file/859347e100ab2ddfe20e98587e6abe7e/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part2.rar
https://rapidgator.net/file/8ca207fa2f05ececd0aaa9f51f51bf53/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part3.rar
https://rapidgator.net/file/73a973c15599a332b5b7c8662dbef045/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part4.rar
https://rapidgator.net/file/911bff31d7eb1df0d6edf64249e94c43/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part5.rar
https://rapidgator.net/file/7f5fdbc4af005de6fee5c65df7315a1d/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part6.rar
https://rapidgator.net/file/3150d01d48482cbde9d60ca4e96ea1f9/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part7.rar

https://clicknupload.click/5t2y5djj839s/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part1.rar
https://clicknupload.click/3jllbl9sjamp/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part2.rar
https://clicknupload.click/xd0yngsb5xl0/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part3.rar
https://clicknupload.click/8cc310lso9dk/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part4.rar
https://clicknupload.click/c7ej1wfw73zv/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part5.rar
https://clicknupload.click/wwt29vz4rmgw/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part6.rar
https://clicknupload.click/meu04cqo49cg/Solidcam.2025.SP2.HF1.for.Solid.Edge.Win64-SSQ..part7.rar

 

[Emperor2011]

SolidCAM 2025 SP2 HF1 for SolidWorks 2018-2025 (x64) Multilingual | Size: 6.29 GB
Language: English​

SolidCAM is a new generation CAD/CAM system developed by the Israeli firm SolidCAM Ltd (Official distributor in Russia - Consistent Software). This system is a comprehensive solution for the automation of metalworking production. Using a wide range of strategies offered by SolidCAM for turning, milling, turning-milling and electrical discharge machining, a technologist can quickly prepare the necessary set of control programs for machining a product.

Functionality of SolidCAM
2.5-axis milling
SolidCAM provides high efficiency and accuracy of 2.5-axis milling of parts. Various processing strategies are supported for such elements as a contour, a selection (with islands) and a groove, as well as various types of hole processing: drilling, countersinking, threading, etc. The system has a wide range of possibilities for 2.5-coordinate processing of analytical surfaces.

3-axis milling
SolidCAM provides a wide range of tools that can be effectively used for the processing of products with complex geometries (dies, molds) and prismatic parts. The geometry for 3D machining is a 3D surface or solid model. The system supports various types of roughing and finishing strategies, such as raster processing with a specified or automatically determined raster angle, equidistant processing, projection processing, waterline processing, etc.
In addition to the already listed capabilities of 2.5- and 3-coordinate processing, SolidCAM offers tools for identifying and refining areas that have not been processed in previous transitions. It is possible to create a database of typical technological processes. Once created, such a parametrized technological process can be reused in the future, which significantly reduces the production preparation time, increases the reliability of the developed programs, unifies the style of technological development, guarantees the use of only optimal processing technologies and ensures the independence of production from the human factor. The absence of overcuts is guaranteed by the presence of means of control and visualization of machining.

Multi-Axis Machining
SolidCAM offers various tools for creating multi-axis machining programs on 4- and 5-axis machining centers. The model is installed in a user-defined processing plane, after which the system automatically calculates all the necessary displacement and rotation parameters for the part zero. As a result, the preparatory-final transition time is significantly reduced and the processing accuracy is increased.

Turning and turning-milling
SolidCAM has a wide range of functions for automating the creation of control programs for turning and turning-milling. SolidCAM supports various types of tools, which makes it possible to effectively perform longitudinal turning, end facing, grooving, etc. In addition, SolidCAM allows you to automatically rough and finish complex contours. Rotary tool support allows you to perform milling and drilling transitions on machining centers.

EDM
The set of wire EDM strategies offered by SolidCAM allows you to process external and internal contours with a constant and variable angle of inclination. The possibility of 4-axis processing is provided. A special algorithm prevents the processed material from falling. SolidCAM provides the user with the means to control the physical parameters of processing along the entire trajectory of the wire.

Whats New
Read: SolidCAM-Release_Notes-2025-SP2-HF1.pdf

HOMEPAGE:

https://www.solidcam.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/a6a9ba2f8de88300332510b2ff434edb/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part1.rar
https://rapidgator.net/file/c81d5b09b723928dcb17d9fe8244a5d9/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part2.rar
https://rapidgator.net/file/81563d39d2ab27eb909b7377b820b4d0/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part3.rar
https://rapidgator.net/file/a5bec13ca4e257304658ac27954bac13/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part4.rar
https://rapidgator.net/file/3e960ae621cdbb5b446b2b5378fb7d73/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part5.rar
https://rapidgator.net/file/59b77a07cba4084bd8df19cb225cff1e/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part6.rar
https://rapidgator.net/file/f9a17882d21222c4f233acb9b425c439/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part7.rar

https://nitroflare.com/view/87AC602720694CF/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part1.rar
https://nitroflare.com/view/F136371C4A8E9AE/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part2.rar
https://nitroflare.com/view/62346288D6A1F5F/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part3.rar
https://nitroflare.com/view/CCE6B323EB91E45/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part4.rar
https://nitroflare.com/view/FA1203F0EA23B52/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part5.rar
https://nitroflare.com/view/E0AD0C028A6840D/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part6.rar
https://nitroflare.com/view/07E3FD3817D072A/SolidCAM.2025.SP2.HF1.for.SolidWorks.Win64-SSQ..part7.rar

 

[Emperor2011]

Advanced System Font Changer 2.2.1.25 Multilingual | Size: 1.7 MB
Language: English​

The Advanced System Font Changer software enables you to set the system font in Windows 10/11. It allows you to set system fonts displayed by Windows 10/11 in a detailed way. It significantly improves the user experience in terms of how text is displayed. Profiles enable you to efficiently change the display using hotkeys.

The software is part of the system font changer software family. Terms of use and every other information related to the software family also apply to this software.

Advantages of Advanced System Font Changer compared to other items in the family
Detailed settings options
Each system font can be of a different size and style
Profiles can be managed
Profiles can be controlled using hotkeys

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.wintools.info/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/9f940935c0e3c72fce0788b2c4624c66/Advanced_System_Font_Changer_2.2.1.25_Multilingual.rar

https://clicknupload.click/pzy4h7om7th0/Advanced_System_Font_Changer_2.2.1.25_Multilingual.rar

 

[Emperor2011]

App Builder 2025.18 (x64) | Size: 235.92 MB
Language: English​

Complete suite to create HTML5 and hybrid mobile applications.

Visual designer
App Builder provide us with dozens of visual and non visual controls we can simply drop it in the application's designer. Timers, HTTP Clients, Text Inputs, Push Buttons and many more controls ready to use.

Based in actions
You no need to know Javascript to create applications. App Builder scripting is based in visual assisted actions that we can use to do whatever we wanted. Hundreds of actions are available out of the box.

Fully extensible
App Builder's applications can be extended in many ways. We can use Javascript in addition to the action's based script. We can develop and use third party App Builder's Javascript plugins and also Apache Cordova plugins.

Whats New
* Make some improvements in the code generation and chat conversation AI tools. Basically we improve how the AI response is placed in the respective editors, doing it in a more convenient way, in order to avoid some editor flickers and that not always we can see the very latest AI response on it (without manual scrolling).

HOMEPAGE:

https://www.davidesperalta.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/c79aa57721d48bc96f87d9f328099f7b/App_Builder_2025.18_x64.rar

https://clicknupload.click/ta9susmejwin/App_Builder_2025.18_x64.rar

 

[Emperor2011]

Argente System Repair 1.0.1.8 | Size: 102.13 MB
Language: English​

Argente System Repair is aimed at diagnosing the Windows system, allowing you to analyze key areas of the computer, identify errors and quickly fix them to ensure high performance.

Three scan modes available
The application is extremely easy to use, mostly due to the user-friendly and minimalistic GUI. The main window displays information and statistical data about the last scan and the number of repaired items.
Below, you can find options to select the scan type. Argente System Repair comes with three different scan modes, each with its own particularities. In the 'Simple' mode, Argente System Repair only analyzes environment variables and errors in the file system and the WMI repository. The 'Recommended' mode, which is the default, selects all the scan areas, including Windows components, installation files and installed packages. It allows you to defragment and recover drive C.
The 'Custom' mode is, as its name suggests, the way to go if you want to freely select the actions to perform and device upon the scan yourself. And speaking of custom mode, you are also free to create an exclusion list to leave out any application or Windows section that you don't want analyzed.
Get info on your computer's health and status
Once you start the scan, Argente System Repair updates the number of detected and scanned elements.
The analysis results are shown, allowing you to explore them and check out details about the application's findings. However, during our test, we were not able to read all the details. This application can get a primary diagnostic when you need to assess your PC's health.

Whats New
official site does not provide any info about changes in this version

HOMEPAGE:

https://argenteutilities.com

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/dc45022124821fdfd316100b278d6e13/Argente_System_Repair_1.0.1.8.rar

https://clicknupload.click/t1swd5zxc8rc/Argente_System_Repair_1.0.1.8.rar

 

[Emperor2011]

Bitsum ParkControl Pro 5.4.1.2 Multilingual | Size: 2.83 MB
Language: English​

Bitsum developed ParkControl because core parking settings are hidden in Windows, but can make such a large difference on performance, particularly when there are bursting CPU bound loads (the most common type).

Core Parking
Core Parking is a sleep state (C6) supported by most newer x86 processors, and newer editions of Windows. Core Parking dynamically disables CPU cores in an effort to conserve power when idle. Disabled cores are re-enabled as the CPU load increases once again. This technology is very similar to frequency scaling, in that it seeks to throttle the CPU when idle.

The problem is that Window's default power profiles are configured far too aggressively when it comes to core parking, especially on workstations. Their interest was in conserving energy, even if this meant marginally decreasing performance. A number of complex parameters control when a core should be parked, and Microsoft tuned heavily towards power savings.

The core parking settings in Windows are implemented as parameters of power plans (aka power profiles). That means you can, for example, disable core parking for the High Performance power plan, but leave it enabled for other plans. And that is exactly the desired tweak for most users: disable parking only for high performance power plans.

Efficacy
Empirical evidence shows that disabling core parking can make a real difference in system performance. There are many factors that will determine how efficacious it will be for any given system, including the CPU type, application load, and user behavior. However, we find that Windows is often over-aggressive in its core parking, resulting in excess latency as cores are unparked to accommodate bursting loads (the most common type of CPU load).

In our tests, we've found AMD processors benefit most from disabling core parking. This is perhaps due to the dramatic difference in the way AMD processors share (hardware) computational resources between logical cores. Microsoft optimized for Intel's HyperThreading, which has much less capable secondary cores. AMD's secondary logical cores are near full CPUs.

YMMV, but if we didn't see real and substantial performance gains after disabling core parking, we wouldn't have authored this utility.

Safety
These tweaks are entirely safe for any PC that is constructed properly. The only way that they could possibly seem to cause some change in behavior is if the PC has overheating issues. In such an event, those issues would be seen regardless of these tweaks by simply placing a sustained high load on the CPU.

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://bitsum.com

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/83f83f371d0f8ab40080cd608e7750ab/Bitsum_ParkControl_Pro_5.4.1.2_Multilingual.rar

https://clicknupload.click/tg29bnuqnno7/Bitsum_ParkControl_Pro_5.4.1.2_Multilingual.rar

 

[Emperor2011]

Bitsum Process Lasso Pro 16.0.1.16 Multilingual | Size: 5.47 MB
Language: English​

Process Lasso is a unique new technology that will, amongst other things, improve your PCs responsiveness and stability. Windows, by design, allows programs to monopolize your CPU without restraint - leading to freezes and hangs. Process Lassos ProBalance (Process Balance) technology intelligently adjusts the priority of running programs so that badly behaved or overly active processes won't interfere with your ability to use the computer!

Process Lasso also offers an assortment of ways to take full control of how your CPUs are allocated to running programs. You can choose at what priority processes should run, and which CPUs (cores) should be assigned to them. You can also disallow certain programs from running, log all programs run, and so much more (see list below).

Once you install Process Lasso, it'll just start working. More advanced users can tweak the configuration, but you needn't touch anything to have it instantly improve your system responsiveness and prevent stalls in high load situations.

For network admins, Proces Lasso works wonderfully on Terminal Servers and in multi-user environments. We have many clients that have been using Process Lasso on their Terminal Servers for years.

Best of all, Process Lasso is written in native C++, not .NET. This means it consumes very few system resourceconsiderably less than any similar software.

Process Lasso Features
Prevent processes from monopolozing the CPU(s)
ProBalance dynamic priority optimization
CPU throttling (new)
Save process priorities for future instances
Save process CPU affin

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://bitsum.com

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/d97da7dca5fa7352b028ea3597b9f20f/Bitsum_Process_Lasso_Pro_16.0.1.16_Multilingual.rar

https://clicknupload.click/x1fwlgpdbehw/Bitsum_Process_Lasso_Pro_16.0.1.16_Multilingual.rar

 

[Emperor2011]

ChrisPC Screen Recorder Pro 2.25.0802.0 | Size: 19.69 MB
Language: English​

ChrisPC Screen Recorder is your perfect toolbox software to record quietly and with astonishing options your desktop screen, even when ChrisPC VideoTube Downloader cannot do the download for you, due to some video protection issues.

On many occasions, as an internet computer user or computer geek you need a set of programs that make your life easier, more enjoyable and smooth: a kind of a toolbox. We all have such a toolbox on our desktop PC, laptops and nowdays even on our smartphones or tablets: from a favourite MP3 player, to your photo viewing and processing app, a movie player, your file browser or back-up software, a YouTube file downloader, a screen recorder and so on.

It's time to introduce our popular software, ChrisPC Screen Recorder, that will make your day-to-day private and/or professional life more simple and practical while using your PC or laptop.

This is not only a useful tool to make screenshots or save videos like its name says, but think of all possibilities. With Screen Recorder, there is a safe and easy way of saving video streams from sources you cannot save/download directly, from your computer's browser for example.

Furthermore you can record tutorials for your friends, family, employees or students. Why explain to your remote colleagues from the East Coast how to operate a spreadsheet or a word processor hidden feature in an email or by phone when you can upload a video on YouTube with the steps recorded in a clip on your laptop? It's faster, right? And re-usable. It's an easy way to help your friends, students or parents.

Easily share and spread your know-how and computer skills with the desktop recording features of ChrisPC Screen Recorder. Your recordings of the desktop screen are available for editing and publishing after recording is finalized.
Screen Recorder has the options to edit out parts from the beginning and/or ending of the recorded clip so you can decide on the final version.

ChrisPC Screen Recorder has many key features including
Record your screen with audio from your PC with 1 click into MP4 files.
Screen recording in 3 modes: ability to record full-screen, selected area on the desktop or an application window.
Record your gameplay in windowed and borderless modes.
Select the optimum recording quality settings for your computer configuration.
Choose the FPS (frame per seconds) for your recordings: 60, 50, 30, 25, 20, 15, 10, 5, 1.
Video encoding presets for H.264 MP4.
Audio encoding to AAC or MP3 codecs.
Customize recording filename based on the recording date and time.
Preview and edit the video after recording.
Hide cursor movement while recording.
Add text watermark to your videos, easily select the font name, size, text color and background color.
Add image watermark to your videos, by choosing the PNG or JPG file to be used as watermark.
Screenshot in 3 modes: Take a snapshot of the fullscreen, selected area on the desktop or an application window.
Save screenshots to PNG, JPG or BMP files.
Customize screenshot filename based on the recording date and time.
Fast Hotkey configuration.
Skinnable interface.
Minimize ChrisPC Screen Recorder to systray.

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.pcscreenrecorder.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/51f25520fd9a54d15a5d859e80ee379b/ChrisPC_Screen_Recorder_Pro_2.25.0802.0.rar

https://clicknupload.click/mt3xs69fgmbr/ChrisPC_Screen_Recorder_Pro_2.25.0802.0.rar

 

[Emperor2011]

ChrisPC VideoTube Downloader Pro 15.25.0801 Multilingual | Size: 45.37 MB
Language: English​

ChrisPC VideoTube Downloader Pro is a powerful software with a friendly user interface that allows you to download videos and playlists from YouTube, videos from Dailymotion, BBC iPlayer, ITV Player, ABC, FOX, CBS.com, Vimeo, Prosieben, Metacafe, Blip.tv, CBC.ca many more video websites. Once the videos are downloaded, you can convert them to formats compatible with iPad, iPhone, iPod, MPEG-4 H.264, MP3, AC3.

This Version comes with many improvements
• Improved download speed by up to 15x times for M3U8, MPD and F4M streams.
• Added segmented download option to improve YouTube video download by up to 12x times.
• Improved Link Finder engine detection of HTML 5 videos, M3U8, F4M, MPD, MP4, M4A, M4V, MP3 video and audio streams.
• Video Download History keeps a log of all your downloads, helps you find downloaded videos by title, author, day of download.
• Added the option to automatically select subtitle language to download for YouTube, ITV, BBC, CBS, ABC, NBC, FOX and others.
• You can download videos up to 3 GB with the free version from the popular video websites: YouTube, Vimeo, DailyMotion, Metacafe.
• Record live streams from YouTube, Livestream, Ustream, M3U8 HLS and F4M HDS streams.

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.videoyoutubedownloader.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/12116be1982a276db317e08862e471aa/ChrisPC_VideoTube_Downloader_Pro_15.25.0801_Multilingual.rar

https://clicknupload.click/8na3g4egtao0/ChrisPC_VideoTube_Downloader_Pro_15.25.0801_Multilingual.rar

 

[Emperor2011]

Clear Disk Info 4.4.1.0 | Size: 934.35 KB
Language: English​

Clear Disk Info is a statistics and health information utility for storage devices such as SSD, HDD and FLASH drives. This tools supports S.M.A.R.T. monitoring, NvmE health log and USB connected devices. Unlike other tools of the same kind, Clear Disk Info displays the information in a human readable, user friendly way.

Overview of Clear Disk Info
Clear Disk Info is a storage device diagnosis utility. It displays some basic information about the selected disk, and also S.M.A.R.T./health information. Clear Disk Info supports hard disk drives (HDD), solid state drives (SSD) and also the most recent NvmE SSDs.
The main reason why we created Clear Disk Info is that most existing tools of this kind display the S.M.A.R.T. attributes in a raw way, and in order for us to understand them we have to go digging over the internet. And even after that, in most cases we're not sure if the relevant data is the Raw Value or the Current value, or both, or whether the Threshold value is meaningful in each line.
Often, we have to make complicated arithmetic operations to calculate whether an attribute is below the threshold. This is where Clear Disk Info comes in handy, because it performs those calculations automatically for you.
Clear Disk Info displays only the actual, meaningful value in the one column, the ideal value in the next column, and also a description of that attribute. This way we don't need to go online searching for instructions or perform complicated operations because everything is already there.
Clear Disk Info can display some information about pen drives and other disks connected through USB ports, but the amount of information that can be retrieved through the adapter is usually limited.
Clear Disk Info is fully portable and standalone. You do not need to install it before being able to run it, and the whole application only contains one file.

Whats New
Updates: official site does not provide any info about changes in this version

HOMEPAGE:

https://www.carifred.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/bfd86270944981276c105a541899101e/Clear_Disk_Info_4.4.1.0.rar

https://clicknupload.click/tdlad16ibpko/Clear_Disk_Info_4.4.1.0.rar

 

[Emperor2011]

CoolUtils Total Audio Converter 6.1.0.284 Multilingual | Size: 119.26 MB
Language: English​

Total Audio Converteis a unique converter that allows you to convert audio files of different extensions. Among them are MP3, WAV, RMVB, MIDI, AMR, FLAC and M4A. The program interface is quite easy and convenient . Thanks to the TreeView, you can view the complete list of files and folders in which they are contained in a directory tree . The main window of Total Audio Converter has several control panels , with which you can choose the size and source settings . The program supports batch conversion. Necessary for everyone who loves music . With it you can easily convert almost any tracks in WAV, MP3, OGG, WMA, APE, FLAC, MP4, AAC, MPC.

The program supports ID3 Tags and CUE files , convert audio tracks without creating an intermediate WAV file that runs in batch mode, a high-speed operation , at the end of the process allows you to play the file , and the availability of clear dvupanelnogo Russian-language interface to the window mate, provide easy and exciting process.
If desired, the program will find the name and fill the tags of tracks from the Internet CDDB database . All you need to do is select the source file (or files ) and press the button with the final format . To convert files , you can run a program or use the Explorer. Simply select the file to your desktop , open the menu by pressing the right mouse button and click Sonvert to. This is possible thanks to the fact that Total Audio Converter integrates into Windows. Use the program, even without running it!
Of the key features of the converter can be noted integration with iTunes, thanks to which you can automatically add the converted file to the library program. Apart from the fact , Total Audio Converter allows you to merge all files in one album and set the sample rate . And that's not all , with the application you can rip audio CD, download videos from YouTube and view detailed technical data on the track.
Despite the huge number of features , with its main task Total Audio Converter also handles "a great success ". In the process of converting an application very efficiently uses system resources without reducing their productivity too .

Features
- Converts almost all audio formats: MP3, RAX, WAV, OGG, CDA, APE, MPC, WMA, FLAC, AAC, MP4, TTA, OFR, SPX, WV, MOD, AMR, Opus, MIDI, VQF.
- Changes bitrate or frequency
- Converts many files in batches
- Converts music from YouTube
- Converts music from SoundCloud
- Has a high quality engine
- Has integrated audio CD ripper
- Can be run via command line
- Direct conversion without temporary files
- Built-in audio player
- Integrates into Windows right-click menu
- Very user-friendly
- NIST Converter
- AU Converter
- MAT5 Converter
- PAF Converter
- TTA Converter
- AUD Converter
- VOX Converter
- XM Converter

What's new
• official site does not provide any info about changes in this version

HOMEPAGE:

https://www.coolutils.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/d733b7611676614f31afabc9f622a3ee/CoolUtils_Total_Audio_Converter_6.1.0.284_Multilingual.rar

https://clicknupload.click/frtkcpox1rzy/CoolUtils_Total_Audio_Converter_6.1.0.284_Multilingual.rar

 

[Emperor2011]

D16 Group Lush 2.1.5 | Size: 583.05 MB
Language: English​

More than an 8-trick pony
Lush 2's multilayer architecture gives you access to virtually limitless sound design possibilities and a wide spectrum of applications.

Super-convenient mixer
Bring it all together easily with a powerful built-in mixer: parametric EQ, compression and 3 send effects per layer!
The sound you're looking for
Astonishing sound quality comes with over 1600 presets to let you easily find what you need.
Look and feel
Beautiful GUI with different themes and sizing to help you work in a way that suits you.
Get under the hood
Powerful, yet practical. An easy-to-tweak instrument that helps you find hit sounds in seconds, unleashing its and your maximum potential
Lush 2 isn't based on just a single machine; it's built from modules that can be found in many modern virtual synths, combined into one compact, logical layout. Don't let its looks fool you: though it may look benign at first, its modular, multi-layer architecture takes it beyond simplistic poly-synths to the top shelf of extremely powerful, deeply programmable and devilishly versatile instruments in your arsenal. Suspiciously accurate sound is achieved only through experience: countless hours were spent analyzing classic analogue synthesizers, and then designing and implementing DSP algorithms with close attention to every component in the signal path - not just approximating its overall output. We deliver to you a synth built on oscillators of uncompromising quality, filters with an incredibly natural warmth and character, and best-in-class effects. On top of that, with all of the layers, multi-layer options, and routing capabilities the plugin offerthere's no end to what you can do with just a single instance of Lush 2
Synthesizer
Lush 2 lets you reach "unheard of" levels of creativity - each layer works as an independent synthesizer with its own polyphony, parameters, enhanced arp, and a choice between 8 of the finest insert effects.
Modulation matrix
An entire page dedicated to assigning your modulation to nearly any parametepick a source, pick a destination, set an amount: creative modulation!
Mixer
Lush 2 also comes complete with a powerful built-in mixer, complete with layer-independent parametric equalizers and compressors that can be rearranged. Volume, pan and superb send effects allow you to put the finishing touches on the final output.

Whats New
Updates: official site does not provide any info about changes in this version.

HOMEPAGE:

https://d16.pl/lush

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/9e6c9f20afa22200bdb579664c2d7007/D16_Group_Lush_2.1.5.rar

https://clicknupload.click/wgrtocbrtoyk/D16_Group_Lush_2.1.5.rar

 

[Emperor2011]

DiskCopy 1.4.4 | Size: 1.74 MB
Language: English​

DiskCopy is a user friendly disk/partition cloning tool.DiskCopy has really cool features such as
MBR to GPT and GPT to MBR. You can chose the partition style of the target disk, it does not need to be the same as the source disk's.

DiskCopy has really cool features such as
MBR to GPT and GPT to MBR. You can chose the partition style of the target disk, it does not need to be the same as the source disk's.
Always bootable. The target disk can be made bootable even if the source disk is not booting up.
Partition selection. Copy only the partitions you select.
Single partition cloning. Clone one partition directly to another, and optionally make it bootable

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.carifred.com/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/e5d19589bea7c720aaf8337fbff8367b/DiskCopy_1.4.4.rar

https://clicknupload.click/bz77au0twrx6/DiskCopy_1.4.4.rar

 

[Emperor2011]

Display Driver Uninstaller 18.1.3.0 Multilingual | Size: 1.2 MB
Language: English​

Display Driver Uninstaller is a driver removal utility that can help you completely uninstall AMD/NVIDIA graphics card drivers and packages from your system, without leaving leftovers behind (including registry keys, folders and files, driver store). The AMD/NVIDIA video drivers can normally be uninstalled from the Windows Control panel, this driver uninstaller program was designed to be used in cases where the standard driver uninstall fails, or anyway when you need to thoroughly delete NVIDIA and ATI video card drivers.

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.wagnardmobile.com

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/aa7a370e1341d507a142eec192819628/Display_Driver_Uninstaller_18.1.3.0_Multilingual.rar

https://clicknupload.click/10rusofxot6e/Display_Driver_Uninstaller_18.1.3.0_Multilingual.rar

 

[Emperor2011]

FlyOobe v0.40.64 (Flyby11) v3.10.510 | Size: 811.75 KB
Language: English​

Flyby11 is a simple patcher that removes the annoying restrictions preventing you from installing Windows 11 (24H2) on unsupported hardware. Got an old PC? No TPM, Secure Boot, or your processor isn't supported? Flyby11 lets you install Windows 11 24H2 anyway. No complicated steps. Just run the tool, and you'll be running Windows 11 on your outdated machine in no time. Think of it as sneaking through the back door without anyone noticing.

Older PCs
For those with an older PC that lacks a Trusted Platform Module (TPM), Secure Boot, or a supported processoyou're in luck! Flyby11 provides a solution that enables you to install Windows 11 version 24H2 on your machine, even if you encounter specific hardware or software limitations. This tool bypasses the usual barriers, ensuring you can enjoy the latest features and improvements offered by this version of Windows 11 without any hassle. Whether upgrading from an older version or making a fresh installation, Flyby11 simplifies the process, making it accessible for all users.
Streamlined Process
Flyby11 significantly streamlines the installation process for Windows 11, making it accessible even to those without technical expertise. Rather than navigating through complex steps, you can download and run Flyby11 to quickly set up Windows 11 on older hardware. It utilizes a unique method within the Windows 11 installation procedure that employs the Windows Server version. Unlike the usual Windows 11 setup, which imposes stringent hardware compatibility checks, this variant helps you bypass many of those requirements. As a result, you can install Windows 11 on machines that would otherwise be deemed incompatible, allowing more users to enjoy the features and performance of the latest operating system, regardless of their hardware's age.
Easy Upgrade to Windows 11
With Flyby11, experiencing the benefits of Windows 11 has never been easier, making it an ideal solution for anyone looking to upgrade their outdated devices. As a result, Flyby11 can operate on machines otherwise deemed unsupported by the standard Windows 11 installation, allowing users to install and run the operating system on a broader range of hardware configurations. This capability is especially beneficial for revitalizing older systems or custom-built PCs that may not meet the usual requirements.
Technical breakdown of the process
Windows Server Setup: The tool uses the Windows Server variant of the setup, which avoids the usual checks for things like TPM, Secure Boot, and specific processor requirements. Install Regular Windows 11: Even though the setup runs in server mode, it installs the standard Windows 11 version (not the server version). Manual ISO Preparation: Flyby11 automates the download and mounting of the ISO, so you don't need to manually tweak anything. You can get the ISO from official sources, or the tool will handle it using the Fido script. This method is the same approach described in the official Windows documentation for upgrading unsupported systems, as detailed in this article.
Bypass Requirements
Flyby11 helps you install Windows 11 24H2 on hardware that doesn't meet the official requirements. Many guides exist online, outlining various methods to bypass the restrictions related to Trusted Platform Module (TPM), Secure Boot, and processor compatibility. However, Flyby11 simplifies this process by automating these bypass methods, allowing users to install the operating system without extensive technical knowledge or manual intervention. This makes it easier for individuals with unsupported hardware to take advantage of the latest features and security updates in Windows 11.
Use Flyby11 to upgrade your system seamlessly without the usual limitations. Flyby11 lets you dive into Windows 11's exciting new features and enhancements. Best of all, you can continue enjoying the performance and familiarity of your existing computer, making the transition smooth and hassle-free!

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://github.com/builtbybel/Flyby11

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/4058e1095897b148f6185d4a81fcd4c5/FlyOobe_v0.40.64_Flyby11_v3.10.510.rar

https://clicknupload.click/eh93niyitsq4/FlyOobe_v0.40.64_Flyby11_v3.10.510.rar

 

[Emperor2011]

Free Download Manager 6.29.1.6392 (x64) Multilingual | Size: 45.93 MB
Language: English​

Manage and schedule all of your download sessions with ease by taking advantage of this fully featured and powerful software application. Download managers are no longer a novelty for power PC users, since they can make the difference between waiting minutes or whole hours for a download to complete, as well as resuming it when the connection breaks down. Among these tools, Free Download Manager is one of the best when it comes to both cost and efficiency.

Schedule your download processes
Download managers have developed a lot, so that most of them rely on basically the same set of features, so the main differences between these programs have come down to the interface and the way they interact with browsers.
Its interface is well organized and structured, so less experienced users will be able to find their way around it without any hassle, while experts can configure it as they see fit.

Easily convert media files
One of the features that sets Free Download Manager apart from other similar software is the fact that it contains a media convertealthough it supports only common formats (AVI, FLV, WMV, MEPG, MP4 and MP3), it does come in handy to be able to encode a video within the same app used for downloading it.

Personalize connection and post-process settings
Furthermore, users can also extract the contents of the archives they download within the app or even perform a virus check using the antivirus solution installed on the computer. Users who rely on dial-up connection can choose to automatically 'hang up' after a download has completed, thus keeping their costs at a minimum.

У вас нет разрешения на просмотр ссылки, пожалуйста Вход или Регистрация

HOMEPAGE:

https://www.freedownloadmanager.org/

FREE DOWNLOAD LINKS:​

https://rapidgator.net/file/0159c2841518b10df8e3ed2182fa3d82/Free_Download_Manager_6.29.1.6392_x64_Multilingual.rar

https://clicknupload.click/djv0mgnznxgm/Free_Download_Manager_6.29.1.6392_x64_Multilingual.rar