East Imperial Magic RAID Recovery 2.9 Multilingual
Windows x86/x64 | File size: 73.32 MB
Repair corrupted RAID 0, RAID 1, RAID 4, RAID 5, RAID 6 and many other types of arrays by connecting the disks to your computer. Recover data from single-disk and multi-disk attached storage devices and NAS servers. Extract data from hard drives used in Synology, QNAP, ASUSTOR, Western Digital, Thecus, TerraMaster and Buffalo NAS systems.
Features and Benefits
Magic RAID Recovery by East Imperial Soft is designed to help users repair many types of corrupted RAID arrays and recover information from single-disk and multiple-disk volumes created in popular DAS and NAS devices as well as a wide range of RAID controllers manufactured by HP, Dell, Adaptec, IBM, Intel, Fujitsu, Silicon Image, LSI, ASMedia, Broadcom, and many others.
Rebuild Corrupted RAID Arrays
• Rebuild and repair corrupted RAID arrays created in Windows, Linux, macOS and NAS devices;
• Mount multiple-disk volumes if the original storage device or RAID controller is broken or unavailable;
• Supports RAID 0, RAID 1, RAID 4, RAID 5, and RAID 6;
• Supports RAID 1E, RAID 5E, RAID 5EE and many types of composite arrays including RAID 01, RAID 10, RAID 50, and RAID 60.
Recovering Data from NAS and DAS Devices
• Mount multi-disk volumes and RAID arrays regardless of the type of RAID controller;
• Automatic detection of disk order and array configuration parameters;
• Recover data from logical volumes spanned across multiple disks;
• Recover data from corrupted single-disk volumes and JBOD arrays;
• Extract files and folders from degraded and corrupted arrays without a lengthy rebuild/resilvering (for mirrored or checksum-based arrays).
Recover Data from NAS Devices
Synology, QNAP, ASUSTOR, Western Digital, Thecus, TerraMaster, Buffalo and many other Network Attached Storage (NAS) devices are readily available. However, the limited system resources and restrictive user interfaces of many pre-build NAS solutions may render the data inaccessible should one of the hard drives in multiple-disk volumes fail even for redundant arrays. Magic RAID Recovery makes it possible to save your files and folders by connecting the remaining disks directly to your computer and extracting the data without the lengthy and unreliable rebuilding/resilvering.
Extract Data from Failing and Corrupted Disks
A NAS device is not always about RAID or disk volumes spanned across multiple hard drives. Sometimes it's just a single disk or a JBOD array formatted in a file system not recognized by your computer. Magic RAID Recovery can help you extract your files and folders by automatically detecting the type of the file system and making the data accessible on your Windows PC. All major file systems used in Windows (NTFS, ReFS, FAT, exFAT), macOS (APFS, HFS+), Linux (Ext2/3/4, XFS, ReiserFS), and Unix (UFS 1/2) are supported.
All Types of Single-Disk and Multi-Disk Volumes
Magic RAID Recovery was tested on hundreds of single-disk and multiple-disk storage configurations. The tool supports all types of RAID arrays including those managed by mdadm (all common NAS units), software and hardware RAID controllers. Magic RAID Recovery recognizes RAID 0, RAID 1, RAID 4, RAID 5, and RAID 6 arrays including exotic configurations (RAID 1E, RAID 5E, RAID 5EE) and composite arrays (RAID 01, RAID 10, RAID 50, RAID 60). Single-disk volumes and JBOD arrays are also supported.
Partial Data Extraction
Depending on the type of the RAID array, it may tolerate one or more faulty hard drives. However, it is common for parity-based arrays to have another disk fail when recovering from a single-disk failure. You can reduce the possibility of the second failure by using Magic RAID Recovery to quickly recover the data instead of performing the full resilvering. If the second disk had already failed, Magic RAID Recovery will apply complex algorithms to attempt recovering the files that are still accessible on the remaining disks. Needless to say that Magic RAID Recovery will recover 100% of the data if the remaining disks were enough for complete recovery.
Wide Range of RAID Controllers
While many controllers advertise support for the various RAID levels, the devil is in the detail. Manufacturers of the different RAID controllers have their own preferences on how to configure non-essential parameters of the array. As a result, one cannot make assumptions about the stripe size or parity. Magic RAID Recovery supports a wide range of RAID controllers including those built into Intel-based motherboards, as well as those manufactured by HP, Dell, Adaptec and many others, including server models.
Extract Data from Degraded Arrays
From time to time, a NAS device or RAID controller may throw the disk out for various reasons, immediately putting the array into degraded state. In certain cases, re-adding the disk only leads to the same problem repeated after many hours of resilvering. The disk may be perfectly readable outside the enclosure with longer than expected timeouts (which is often the case for SMR drives), or there might be just a few bad blocks not affecting the majority of the data. Magic RAID Recovery allows remounting such arrays and extracting the data without the lengthy synchronization.
Recover Data from Corrupted Volumes
A perfectly healthy RAID might be unreadable because of corrupted file system structures. Rebuilding or resilvering such arrays would be a waste of time, while inaccessible volumes can be repaired by reconstructing their file system structures. Magic RAID Recovery can check the volume and safely extract the original files and folders.
Advanced Manual Mode
Fully automated performance has its benefits, but it has its drawbacks. If you are an advanced user and know your RAID, or if you work in a data recovery lab, you may achieve a higher recovery rate by manually specifying the correct RAID parameters. Should you know only some characteristics of the RAID array, Magic RAID Recovery will help identify the remaining parameters automatically.
What's new
• official site does not provide any info about changes in this version
Editions: Unlimited / Commercial / Office / Home
HOMEPAGE
Код:
https://www.magicuneraser.com/DOWNLOAD
Код:
https://rapidgator.net/file/69a3d25d0a771b1134678e93aedaf369/Magic.RAID.Recovery.2.9.rar.html
Код:
https://nitroflare.com/view/0DD607FDEE10618/Magic.RAID.Recovery.2.9.rar
File Name, and can be saved as an extract in a CSV file. Another task that can be automated with the Automatic PDF Processor is the extraction of attachments from PDF files, for example to save ZUGFeRD XML files, XRechnung attachments or similar as part of a PDF invoice in the same folder.
). DAW-like horizontally scrolling multi-track timeline, familiar from all digital audio workstations, is used to keep track of you items. Lyric, video, audio, primitive and generative AI tracks, as many as you want and need, keeping mind you PC performance. Includes integrated library for video import & export and also support using FFMPEG optionally. This is the video maker rethought from the scratch!
